Ricoh D127 - Page 294

008
Server IP (Secondary)
Range: 000.000.000.000 to
255.255.255.255
Specifies the IP address assigned to the computer designated to function as the
secondary delivery server of Scan Router. This SP allows only the setting of the IP
address without reference to the DNS setting.
009
Delivery Server Model [0 to 4 / 0 / 1 /step]
Allows changing the model of the delivery server registered by the I/O device.
0: Unknown, 1: SG1 Provided, 2: SG1 Package,
3: SG2 Provided, 4: SG2 Package
010
Delivery Svr. Capability [0 to 255 / 0 / 1 /step]
Bit7 = 1 Comment information exits
Changes the capability of the
server that is registered as an
I/O device.
Bit6 = 1 Direct specification of mail address possible
Bit5 = 1 Mail RX confirmation setting possible
Bit4 = 1 Address book automatic update function
exists
Bit3 = 1 Fax RX delivery function exists
Bit2 = 1 Sender password function exists
Bit1 = 1 Function to link MK-1 user and Sender exists
Bit0 = 1 Sender specification required (if set to 1, Bit6
is set to "0")
011
Delivery Svr. Capability (Ext) [ 0 to 255 / 0 / 1 /step]
Changes the capability of the server that is registered as an I/O device.
Bit7 = 1 Address book usage limitation (Limitation for each authorized user)
Bit6 = 1 RDH authorization link
Bit5 to 0: Not used
013
Server Scheme (Primary) -
Specifies the scheme of the primary delivery server.
3. Appendix: SP Mode Tables
86