Ricoh D127 - Page 406

5 On hook dial
0: Disabled 1: Enabled
0: On hook dial is disabled.
6-7 Not used Do not change the factory settings.
System Switch 0B - Not used (Do not change the factory settings.)
System Switch 0C - Not used (Do not change the factory settings.)
System Switch 0D - Not used (Do not change the factory settings.)
System Switch 0E [SP No. 1-101-015]
No FUNCTION COMMENTS
0-1 Not used Do not change the settings.
2 Not used This machine does not have the capture function.
3
Memory storing while the handset
used Enabled/Disabled selection
[0: Disabled 1: Enabled]
Manual receive is disabled while this function is Enabled
(1).
4-7 Not used Do not change these settings.
System Switch 0F [SP No. 1-101-016]
No FUNCTION COMMENTS
5. Appendix: Fax Service Program
198