No FUNCTION COMMENTS
0-7 IP-Fax dial interval setting
Adjusts the interval of the IP-fax dialing.
The interval of IP-fax dialing is calculated by following
formula.
[Interval time = specified value with this switch x 2 sec]
Communication Switch 0A [SP No. 1-104-011]
No FUNCTION COMMENTS
0
Point of resumption of memory
transmission upon redialing
0: From the error page
1: From page 1
0: The transmission begins from the page where
transmission failed the previous time.
1: Transmission begins from the first page, using normal
memory transmission.
1-7 Not used Do not change the settings.
Communication Switch 0B [SP No. 1-104-012]
No FUNCTION COMMENTS
0-3 Not used (do not change the settings)
4
Received file output ON/OFF
selection for multiple relayed
communications.
0: OFF 1: ON
Determines whether received file(s) is printed out or not
by the relaying copier on multiple relayed
communications.
5-7 Not used Do not change the settings.
Communication Switch 0C – Not used (do not change the settings)
Communication Switch 0D [SP No. 1-104-014]
No FUNCTION COMMENTS
Bit Switches
221
To Next Page
Loading...
