Communication Switch 03 [SP No. 1-104-004]
No FUNCTION COMMENTS
0-7
Maximum number of page
retransmissions in a G3 memory
transmission
00 - FF (Hex) times.
This setting is not used if ECM is switched on.
Default setting - 03(H)
Communication Switch 04 [SP No. 1-104-005]
No FUNCTION COMMENTS
0
Remote switch setting for TEL mode
0: OFF 1: ON
Determines whether remote switching is ON/OFF on
receiving fax transmission, in TEL mode.
1
Remote switch setting for FAX
mode
0: OFF 1: ON
Determines whether remote switching is ON/OFF on
auto receiving, in FAX mode.
2
Remote switch setting for AUTO
mode
0: OFF 1: ON
Determines whether remote switching is ON/OFF on
auto receiving, in AUTO mode.
3-7 Not used Do not change the settings
Communication Switch 05 [SP No. 1-104-006]
No FUNCTION COMMENTS
0-3
Number setting for remote
switching
00-09 (0-9: HEX)
Selects the handset number pushed to switch between
TEL/FAX.
4-7 Not used Do not change the settings
Communication Switch 06 - Not used (do not change the settings)
Communication Switch 07 - Not used (do not change the settings)
Communication Switch 08 - Not used (do not change the settings)
Communication Switch 09 [SP No. 1-104-010]
5. Appendix: Fax Service Program
220
To Next Page
Loading...
