1
Switching between G3 standard and
G3 non standard
0: Enable switching
1: G3 standard only
Enables/disables switching between G3 standard
and G3 non-standard.
2 Not used. Do not change this setting.
3
ECM frame size selection at
transmitting
0: 256byte, 1: 64byte
Selects the ECM frame size for sending.
4
DIS detection times for echo prevention
0: 1 time, 1: 2 times
Sets the number of times for DIS to detect echoes.
5
CTC transmission selection
0: PPRx1
1: PPRx4
When "0" is selected, the transmission condition is
decided by error frame numbers.
When "1" is selected, the transmission condition is
based on the ITU-T method.
6
Shift down setting at receiving negative
code
0: OFF, 1: ON
Selects whether to shift down when negative codes
are received.
7 Not used Do not change this setting.
IP Fax Switch 04 [SP No. 1-111-005]
No. FUNCTION COMMENTS
0-3 TCF error threshold
Sets the TCF error threshold level.
[00 to 0F]
The default is "1111" (0F H).
4-7 Not used Do not change these settings.
IP Fax Switch 05 [SP No. 1-111-006]
No. FUNCTION COMMENTS
Bit Switches
239
To Next Page
Loading...
