7.3 User Functions
Item Description Setting Method
2-01 Count up/down Up count: Adding each copy
Down count: Subtracting each copy
Select one of the above for copy count.
*This function is the same as the function in
user utility [10].
Initial setting: Up selected
Press [2-01] of the user functions menu.
⇓
Select Up/Down.
2-02 Set user program number(s) The number of user programs can be
selected in a range from 1 to 10.
Programmable modes:
* Set copy number
* Paper size (including auto paper selection))
* Image density level (including AID)
* Sort/stack/normal
* Margin adjustment
* Duplex
* Magnification (Including auto magnification
selection)
Initial setting: 10
Press [2-02] of the user functions menu.
⇓
Input the numerical value (1 to 10) from the
key pad. (Input of 11 or more is automatically
corrected to 10.)
⇓
Press the Enter [#] key.
* When the Enter [#] key is not pressed,
previous data are effective.
1 July 1994 User Functions
7-3
To Next Page