Ricoh M065 - Page 458

System Service Mode
M065/M066 8-48 SM Appendix
2152
[Shading Correct Setting] FA
Adjusts the area correction value for each LD power.
The main scan is divided into 16 areas. However, the image areas are limited
from area 1 to area 14.
For BK and Magenta, area 1 is at the rear side of the machine (left side of the
image) and area 14 is at the front side of the machine (right side of the image).
For Cyan and Yellow, area 1 is at the front side of the machine (right side of the
image) and area 14 is at the rear side of the machine (left side of the image).
001 Bk: LD1 Area 0 *ENG
[50 to 150 / 100 / 0.1 %/step]
002 Bk: LD1 Area 1 *ENG
[50 to 150 / 98.4 / 0.1 %/step]
003 Bk: LD1 Area 2 *ENG
[50 to 150 / 98.8 / 0.1 %/step]
004 Bk: LD1 Area 3 *ENG
[50 to 150 / 97.9 / 0.1 %/step]
005 Bk: LD1 Area 4 *ENG
[50 to 150 / 98 / 0.1 %/step]
006 Bk: LD1 Area 5 *ENG
[50 to 150 / 99 / 0.1 %/step]
007 Bk: LD1 Area 6 *ENG
[50 to 150 / 99.9 / 0.1 %/step]
008 Bk: LD1 Area 7 *ENG
[50 to 150 / 100.5 / 0.1 %/step]
009 Bk: LD1 Area 8 *ENG
[50 to 150 / 100.4 / 0.1 %/step]
010 Bk: LD1 Area 9 *ENG
[50 to 150 / 100.9 / 0.1 %/step]
011 Bk: LD1 Area 10 *ENG
[50 to 150 / 101.9 / 0.1 %/step]
012 Bk: LD1 Area 11 *ENG
[50 to 150 / 102.7 / 0.1 %/step]
013 Bk: LD1 Area 12 *ENG
[50 to 150 / 103.5 / 0.1 %/step]
014 Bk: LD1 Area 13 *ENG
[50 to 150 / 104.5 / 0.1 %/step]
015 Bk: LD1 Area 14 *ENG
[50 to 150 / 105.5 / 0.1 %/step]
016 Bk: LD1 Area 15 *ENG
[50 to 150 / 98.4 / 0.1 %/step]
017 Bk: LD2 Area 0 *ENG
[50 to 150 / 100 / 0.1 %/step]
018 Bk: LD2 Area 1 *ENG
[50 to 150 / 98.4 / 0.1 %/step]