System Service Mode
M065/M066 8-240 SM Appendix
004 Attack Max Num *CTL
Sets a limit on the number of requests
received for certification in order to slow
down the certification speed when an
excessive number of access attempts
have been detected.
[50 to 200 / 200 /1 attempt]
5420
[User Authentication]
These settings should be done with the System Administrator.
Note: These functions are enabled only after the user access feature has
been enabled.
041 Printer *CTL
Determines whether certification is
required before a user can use the printer
applications.
[0 to 1 / 0 / 1]
0: On, 1: Off
051 SDK1
*CTL
[0 or 1 / 0 / 1] 0: ON. 1: OFF
Determines whether certification is
required before a user can use the SDK
application.
061 SDK2
071 SDK3
5481
[Authentication Error Code]
These SP codes determine how the authentication failures are displayed.
001 System Log Disp *CTL
Determines whether an error code
appears in the system log after a user
authentication failure occurs.
[0 to 1 / 0 / 1]
0: Off, 1: On
To Next Page
Loading...
