System Service Mode
SM Appendix 8-249 M065/M066
Appendix:
SP Mode
Tables
023
Connect Mode (N/M)
This SP displays and selects the Embedded RC Gate connection method.
[0 or 1 / 0 / 1 /step
0: Internet connection
1: Dial-up connection
061
Cert. Expire Timing DFU
Proximity of the expiration of the certification.
062
Use Proxy
This SP setting determines if the proxy server is used when the machine
communicates with the service center.
063
Proxy Host
This SP sets the address of the proxy server used for communication
between Embedded RC Gate-N and the gateway. Use this SP to set up or
display the customer proxy server address. The address is necessary to set
up Embedded RC Gate-N.
The address display is limited to 128 characters. Characters beyond
the 128 character are ignored.
This address is customer information and is not printed in the SMC
report.
064
Proxy Port Number
This SP sets the port number of the proxy server used for communication
between Embedded RC Gate-N and the gateway. This setting is necessary to
set up Embedded RC Gate-N.
This port number is customer information and is not printed in the
SMC report.
To Next Page
Loading...
