Caster Table (M393)
SM 2-25 M065/M066
Installation
7. Install the securing bracket [A] ( x 2).
If two or three optional paper feed units are to be installed, install the securing
bracket [A] at the right side of the optional paper feed units in a similar location to
that shown above to secure them (
x 2).
8. Install the joint table brackets [B] (
x 5).
9. Install the securing holder [C].
10. Reinstall the right cover and the right cover of the paper feed unit (
x 2).
11. Remove the left cover [A] of the paper feed unit ( x 2).
12. Remove the screw shown above.