Caster Table (M393)
M065/M066 2-26 SM
13. Install the table joint bracket [A] ( x 2).
14. Install the securing bracket [B] (
x 1 (M3x8) [C], spring washer x 1 [D], washer x 1
[E]).
If two or three optional paper feed units are to be installed, install the securing
bracket [B] at the left side of the optional paper feed units in a similar location to
that shown above to secure them (
x 1 (M3x8) [C], spring washer x 1 [D], washer
x 1 [E]).
15. Reinstall the right cover of the paper feed unit (
x 2).
16. Close the front door.
17. Adjust the plate until it is level by rotating each screw (
p.2-20 "For Installing the
Caster Table (M393) Only").
To Next Page
Loading...
