System Service Mode
M065/M066 8-260 SM Appendix
5845
[Delivery Server Setting]
Provides items for delivery server settings.
003
Retry Interval *CTL
[60 to 900 / 300 / 1 sec]
Determines the time interval between retries before the machine returns to
standby after an error occurs during an image transfer with the delivery
scanner or SMTP server.
004
Number of Retries *CTL
[0 to 99 / 3 / 1]
Determines the number of retries before the machine returns to standby after
an error occurs during an image transfer with the delivery or SMTP server.
022
Instant Trans Off *CTL
[0 to 1 / 1 / -]
Enables or disables the prevention function for the continuous data sending
error.
0: Disable, 1: Enable
5846 [UCS Settings]
*CTL -
010
LDAP Search Timeout
[1 to 255 / 60 / 1 /step]
Sets the length of the timeout for the search of the LDAP server.
041
Fill Addr Acl Info.
This SP must be executed immediately after installation of an HDD unit in a
basic machine that previously had no HDD. The first time the machine is
powered on with the new HDD installed, the system automatically takes the
address book from the NVRAM and writes it onto the new HDD. However, the
new address book on the HDD can be accessed only by the system
administrator at this stage. Executing this SP by the service technician
immediately after power on grants full address book access to all users.
Procedure
1. Turn the machine off.
2. Install a new HDD.
3. Turn the machine on.
4. The address book and its initial data are created on the HDD automatically.
To Next Page
Loading...
