Ricoh M095 - Checking that MUSIC was Performed Correctly

Electrical Components
M095/M096/M099/M100 4-78 SM
horizontal direction) and tray if necessary.
18. Select "2nd Transfer Fuser Temp", and then adjust the transfer roller bias and the
temperature reduction of the fusing unit for each paper type and for the front and back
sides. The default settings for normal operation are all '0'.
19. Perform “Color Registration” in the “Engine Maintenance” menu.
20. Turn the power off and on.
 MUSIC will be performed automatically.
21. Print out the test chart (
p.4-11), and make sure that MUSIC was performed
successfully.
 If MUSIC is not performed successfully, see “If MUSIC has not been performed
successfully” (
p.4-11).
22. If necessary, adjust the registration settings for the front and rear sides of each paper tray in
the “Engine Maintenance” menu.
23. Exit "Engine Maintenance".
Checking that MUSIC was Performed Correctly
Four sets of vertical lines appear on the test chart (C and k, M and k, Y and k…). In each set,
look for vertical lines that are aligned within the region defined by “OK”.
If all sets have at least one set of vertical lines that are aligned [A], MUSIC was successful.