Ricoh M095 - 4.13 Scanner Unit Service (MF Models)

Scanner (only for MF Models)
M095/M096/M099/M100 4-90 SM
4.13 SCANNER (ONLY FOR MF MODELS)
4.13.1 SCANNER UNIT
1. Controller box cover ( p.4-54)
2. Disconnect the flat cable with the ferrite core [A] (
x 1, hooks x 2).
3. Stand left cover [B] and right cover [C] (hook x 1 each)
4. Disconnect the scanner harness, power cord and ground cable (and the ADF harness and
power cord if the ADF is installed in the scanner unit) (
x 1).