Ricoh M095 - Entering the Fax Service Test Menu; Exiting the Maintenance Mode Menu; Fax Service Test Menu (Only for Mf Models); Going into the Next Level; Returning to the Previous Level

Service Menu
SM 5-35 M095/M096/M099/M100
System
Maintenance
Reference
5.4.3 FAX SERVICE TEST MENU (ONLY FOR MF MODELS)
Entering the Fax Service Test Menu
Turn on the machine while pressing the "Facsimile" key.
Selecting an Item
To select the item, press the "Up" or "Down" key.
Going into the Next Level/ Returning to the Previous Level
 To go into the next level of an item, select an item then press the "OK" key.
 To return to the previous level of an item, press the "Return" key.
Exiting the Maintenance Mode Menu
To exit the maintenance mode menu, press the "Clear/Stop" or "Return" key until the "Ready"
display appears.
Menu List
Fax Test (only for MF models)
Off-Hook Test
On Hook Executes the on hook test.
Off Hook Executes the off hook test
CED Test Executes the CED test.
CNG Test 1100 Hz Executes the CNG test
ANSam Executes the ANSam test.
Ring Tone Test Executes the ring tone test.
DTMF Test
Tone [0] to [9] Executes the DTMF tone 0 to 9 test.
Tone [*] Executes the DTMF tone * test.
Tone [#] Executes the DTMF tone # test.
Tone Stop Executes the Stop DTMF tone test.