Ricoh M095 - Tm (Toner Mark) Sensor Base

Image Transfer
M095/M096/M099/M100 4-30 SM
4.6.6 TM (TONER MARK) SENSOR BASE
1. Open the top cover.
2. Remove all AIO cartridges (
p.4-18).
3. Slide the ITB unit to the front side or remove it.
4. Rear cover (
p.4-5)
5. Controller box cover (
p.4-54)
6. MF models only: FCU and Speaker bracket (
p.4-58)
7. Disconnect CN306 on the EGB (
x 1).
8. Harness cover [A] (hook)
9. TM sensor base [B]