Ricoh M095 - Paper Exit Sensor

Paper Exit
SM 4-53 M095/M096/M099/M100
Replacement
and
Adjustment
4.10.2 PAPER EXIT SENSOR
1. Rear cover ( p.4-5)
2. Right cover (
p.4-7)
3. Fusing pawl solenoid assembly [A] (
x 4)
 The upper right screw in the above photo is different from other 3 screws.
4. Remove the paper exit sensor [C] while lightly pressing the feeler [B] in the direction shown
by the arrow (hooks x 4,
x 1).