Energy Saving
SM 6-1 M095/M096/M099/M100
Environmenta
l
Conservation
6. ENVIRONMENTAL CONSERVATION
6.1 ENERGY SAVING
6.1.1 ENERGY SAVER MODES
Customers should use energy saver modes properly, to save energy and protect the
environment.
Energy Saver Modes Description
Energy Saver Mode 1 Lower the fusing temperature.
Energy Saver Mode 2
(Sleep Mode)
No power is supplied to the printing engine, and almost none
to the controller.
When the machine is not being used, the machine enters energy saver mode to reduce the
power consumption by lowering the fusing temperature.
The area shaded gray in this diagram represents the amount of energy that is saved when the
timers are at the default settings (10 minutes). If the timers are changed, then the energy saved
will be different. For example, if the timers are all set to 240 minutes, the gray area will
disappear, and no energy is saved before 240 minutes expires.
To Next Page
Loading...
