Configuration, Maintenance and Test Page Information
M095/M096/M099/M100 5-38 SM
To Print the Configuration Page/ Maintenance Page (MF models)
1. Turn on the machine.
2. Press the "User Tools" key.
3. Press the "
" or " " key to select "Reports Print", and then press the "OK" key.
4. Press the "
" or " " key to select "Configuration Page" or "Maintenance Page", and then
press the "OK" key.
5. The configuration page or maintenance page is printed.
Press “Escape” to return to the previous menu.
5.5.2 ERROR LOG
The Error Log on the configuration page has the error logs (SC codes) and the following
information. However, the following error codes cannot be stored after turning off the machine.
Error Code Description
Code 3
Paper misfeed
Paper is not detected in the tray.
The loaded paper size does not match the setting.
Some unit(s) is not correctly installed.
Code 4 Print/Data Error
Code 5 A consumable supply has run out
Code 6
Warning; Toner near end, Waste toner bottle near full, TM
sensor cleaning, Fusing belt near end or Transfer belt near end
Code 7 Alert; Diagnostic Error
To Next Page
Loading...
