Image Fusing
SM 4-39 M095/M096/M099/M100
Replacement
and
Adjustment
4.8 IMAGE FUSING
Make sure that the fusing unit is cool before you touch it. The fusing unit can be very
hot.
Make sure to restore the insulators, shields, etc after you service the fusing unit.
4.8.1 FUSING UNIT
Execute "Reset Fuser Unit" with the "Engine Maintenance" menu if you replace the
fusing unit, otherwise a fusing error may occur.
1. Open the front cover.
2. Left cover ( p.4-8)
3. Disconnect the connectors [A], [B].
To Next Page
Loading...
