Ricoh M095 - Lamp Stabilizer Board; When Reinstalling the Exposure Lamp

Scanner (only for MF Models)
M095/M096/M099/M100 4-96 SM
When reinstalling the exposure lamp
Wire the lamp cords as shown above. Otherwise, the top cover pinches the lamp cords and
damages them when reinstalling the top cover on the scanner carriage unit.
4.13.5 LAMP STABILIZER BOARD
1. Scanner carriage unit ( p.4-93)
2. Carriage bottom cover [A] (
x 2)
3. Lamp stabilizer [B] (
x 1)