Ricoh M095 - Page 166

Service Menu
M095/M096/M099/M100 5-26 SM
LSU Adjustment
Input 160 bytes
setting.
Character: alphanumeric "0-9", "a-f", "A-F", only
valid data can be input.
Input length: 160 bytes
Trans. Belt Adjust
When you execute "Trans. Belt Adjust", the transfer belt adjustment is
done. This calibrates the motor speed to match the length of the new
transfer belt.
Fuser SC Detect On/Off*
If On, the engine detects SC559. If Off, the engine
does not detect "Fusing SC Reset".
Color
Registration
The engine will do color registration and density tuning automatically.
The printer will warm up automatically after this setting is changed.
Reset Transfer
Unit
Resets the transfer unit life counter.
Reset Fuser Unit Resets the fusing unit life counter.
Fuser SC Reset Resets the Fusing related SC.
Reset 2nd
Transfer unit
Resets the 2nd transfer unit (transfer roller) life counter.
Special Mode
DFU
Reset Count
(only for Printer
Models)
Resets counters to factory defaults.
Clear log
(only for Printer
Models)
Clears the error and the jam counter logs.