Engine SP Mode
SM 5-13 D245/D246/D247
Maintenance
1159 [Fusing Jam Detect]
This SP mode detects SC559. Set this SP mode to ‘Yes’ if the machine
experiences paper jam problems on a continual basis.
1-159-001
SC Display *ENG [0 to 1 / 0 / 1 / step]
0: Off (No fusing jam SC)
1: On (Fusing jam SC displayed)
1801 [MotorSpeedAdjust]
Adjusts the speeds of each motor.
1-801-001
MainMonitor:100 *ENG [-2.5 to 2.5/ 0 / 0.1% / step]
Adjusts the speed of main motor.
1903 [Feed Re-energize]
Directly reflects the adjusted value.
A "+" setting increases the amount of driving.
A “-” setting decreases the amount of driving.
1-903-001
Bypass Feed *ENG [-10 to 10 / 0 / 1 mm / step]
1-903-002
Tray1 Feed *ENG [-10 to 10 / 0 / 1 mm / step]
To Next Page
Loading...
