Ricoh MP 2014AD - Page 159

Engine SP Mode
SM 5-15 D245/D246/D247
System
Maintenance
1990 [SC990 plt detail]
Displays the details about SC990.
1-990-001
- *ENG [0 to 4294967295 / 0 / 1 / step]
0x29000: Process buffer full
0x29001: No paper feed without optional tray
0x29002: No paper exit without optional tray
0x29003: No termination of process without optional tray
0x81E00: No termination of recovery without optional tray
0x60048: No restart of registration roller
0x60049: No recovery from optional tray 1
0x6004A: No recovery from optional tray 2
0x49000: No termination of recovery with optional trays
0x49001: No termination of process control
1991 [Max Fusing Duty]
Adjusts the maximum duty of the heating lamp at printing or warming up.
1-991-001
Roller Center *ENG [40 to 100 / 100 / 10% / step]
1-991-003
Warm-up Center *ENG [40 to 100 / 100 / 10% / step]
1996 [Heater Forced Off]
Specifies the time for turning off the heating lamp forcibly when the paper
type is changed during the printing.
1-996-005
After Printing *ENG [0 to 120 / 7 / 1 sec / step]