Ricoh MP 2014AD

Engine SP Mode
SM 5-22 D245/D246/D247
2-803-003
Initial mu count *ENG DFU
2-803-004
Initial Vt Target *ENG DFU
2-803-005
Vt Target *ENG DFU
2-803-006
Vt Target Corr *ENG DFU
2906 [Tailing Control]
2-906-001
Shift Range *ENG [0.0 to 1.0 / 0.0 / 0.1 mm / step]
Shifts the image position at the intervals specified by SP2-906-002. When
the copier is continuously printing vertical lines (such as in tables), the
paper may not separate correctly. This SP can prevent this.
2-906-002
Number of Sheets ENG [0 to 10 / 0 / 1 sheet / step]
Changes the interval of the image position shift specified by SP2-906-001.
2908 [Forced Toner Supp]
2-908-001
- ENG [- / - / -]
[Execute]
Supplies the toner to the development unit. The processing stops under
either of the following conditions:
 The toner density in the development unit reaches the standard level.
 The processing has continued for 2 minutes.
2915 [Polygon Rota Time]
2-915-001
Idling Time ADJ *ENG [0 to 60 / 15 / 1 sec / step]
Adjusts the polygon motor idling time.
2-915-002
Post Idling ADJ *ENG [0 to 60 / 10 / 1 sec / step]
Adjusts the post idling time