Rigol DP832 Programming Guide

Chapter 4 Programming Demos RIGOL
DP800 Programming Guide 4-15
4 Add the Text, Edit and Button controls and the layout is as shown in the figure below.
5 Click ViewClassWizard and add the control varibles in the Member Variables tab in the pop-up
interface.
Instrument address: CString m_strInstrAddr
Command: CString m_strCommand
Return value: CString m_strResult

Rigol DP832 Specifications

General

Number of Outputs	3
Output Voltage Range CH1/CH2	0-30V
Output Voltage Range CH3	0-5V
Output Current Range CH1/CH2	0-3A
Output Current Range CH3	0-3A
Total Power	195 W
Power per Channel CH1/CH2	90 W
Power per Channel CH3	15 W
Voltage Resolution	1 mV
Current Resolution	1 mA
Interfaces	USB, RS232
Display	3.5 inch TFT LCD