Rigol DP832 Programming Guide

Chapter 2 Command System RIGOL
DP800 Programming Guide 2-21
:MMEMory Commands
The :MMEMory commands are used to store the file to the specified external storage directory, read or
delete the specified file in the external memory as well as query the disk information of the external
memory.
Command List:
 :MMEMory:CATalog?
 :MMEMory:CDIRectory
 :MMEMory:DELete
 :MMEMory:DISK?
 :MMEMory:LOAD
 :MMEMory:MDIRectory
 :MMEMory:STORe
:MMEMory:CATalog?
Syntax :MMEMory:CATalog?
Description Query all the files and folders in the current operation directory.
Explanation This command is only applicable to external memory.
Return Format The query returns all the files and folders under the current operation directory, for
example, RIGOL0.BMP,RIGOL1.BMP,RIGOL2.BMP,cc.RSF.

Rigol DP832 Specifications

General

Number of Outputs	3
Output Voltage Range CH1/CH2	0-30V
Output Voltage Range CH3	0-5V
Output Current Range CH1/CH2	0-3A
Output Current Range CH3	0-3A
Total Power	195 W
Power per Channel CH1/CH2	90 W
Power per Channel CH3	15 W
Voltage Resolution	1 mV
Current Resolution	1 mA
Interfaces	USB, RS232
Display	3.5 inch TFT LCD