Rigol DP832 Programming Guide

Chapter 5 Appendix RIGOL
DP800 Programming Guide 5-1
Chapter 5 Appendix
Appendix A: Command List
 :ANALyzer Commands
:ANALyzer:ANALyze
:ANALyzer:ENDTime
:ANALyzer:FILE?
:ANALyzer:MEMory
:ANALyzer:MMEMory
:ANALyzer:OBJect
:ANALyzer:RESult?
:ANALyzer:STARTTime
:ANALyzer:VALue?
 :APPLy Command
:APPLy
 :DELAY Commands
:DELAY:CYCLEs
:DELAY:ENDState
:DELAY:GROUPs
:DELAY:PARAmeter
:DELAY[:STATe]
:DELAY:STATe:GEN
:DELAY:STOP
:DELAY:TIME:GEN
 :DISPlay Command
:DISPlay:MODE
 IEEE488.2 Common Commands
*IDN?
*RCL
*RST
*SAV
*TST?
 :INSTrument Commands
:INSTrument:NSELect
:INSTrument[:SELEct]
 :MEASure Commands
:MEASure:ALL[:DC]?
:MEASure:CURRent[:DC]?

Rigol DP832 Specifications

General

Number of Outputs	3
Output Voltage Range CH1/CH2	0-30V
Output Voltage Range CH3	0-5V
Output Current Range CH1/CH2	0-3A
Output Current Range CH3	0-3A
Total Power	195 W
Power per Channel CH1/CH2	90 W
Power per Channel CH3	15 W
Voltage Resolution	1 mV
Current Resolution	1 mA
Interfaces	USB, RS232
Display	3.5 inch TFT LCD