Rigol DP832 Programming Guide

RIGOL Chapter 2 Command System
2-42 DP800 Programming Guide
:PRESet:USER[n]:SET:SURE
Syntax :PRESet:USER[n]:SET:SURE
Description Confirm the setting of the specified user-preset state.
Parameter
Name Type Range Default
[n]
Discrete
1|2|3|4
None
:PRESet:USER[n]:SET:VOLTage
Syntax :PRESet:USER[n]:SET:VOLTage <voltage>|MINimum|MAXimum}
:PRESet:USER[n]:SET:VOLTage? [MINimum|MAXimum]
Description Set the voltage of the specified user-preset state.
Query the voltage of the specified user-preset state.
Parameter
Name Type Range Default
[n] Discrete 1|2|3|4 None
<voltage> Real
Voltage range of the
current channel
Refer to the
“Explanation”
Explanation  By default, this command sets the parameter of the channel currently selected.
If you want to set the parameter of other channel, please use
the
:INSTrument[:SELEct] command to select the desired channel.
 The voltage default values of each user-preset state are as shown in the table
below.
DP831A DP832A/DP832
CH1 CH2 CH3 CH1 CH2 CH3
USER1 1.500V 3.300V -5.000V 3.300V 3.300V 1.500V
USER2 3.300V 4.200V -4.200V 4.200V 4.200V 4.200V
USER3 3.300V 5.000V -8.000V 5.000V 8.000V 3.300V
USER4 5.000V 12.000V -12.000V 12.000V 24.000V 5.000V
Return Format The query returns the voltage, for example, 5.000.
Example :PRES:USER1:SET:VOLT 5
:PRES:USER1:SET:VOLT?

Rigol DP832 Specifications

General

Number of Outputs	3
Output Voltage Range CH1/CH2	0-30V
Output Voltage Range CH3	0-5V
Output Current Range CH1/CH2	0-3A
Output Current Range CH3	0-3A
Total Power	195 W
Power per Channel CH1/CH2	90 W
Power per Channel CH3	15 W
Voltage Resolution	1 mV
Current Resolution	1 mA
Interfaces	USB, RS232
Display	3.5 inch TFT LCD