Rigol DP832 Programming Guide

Chapter 2 Command System RIGOL
DP800 Programming Guide 2-39
:PRESet:USER[n]:SET:CURRent
Syntax :PRESet:USER[n]:SET:CURRent {<current>|MINimum|MAXimum}
:PRESet:USER[n]:SET:CURRent? [MINimum|MAXimum]
Description Set the current of the specified user-preset state.
Query the current of the specified user-preset state.
Parameter
Name Type Range Default
[n] Discrete 1|2|3|4 None
<current> Real Current range of the current channel
Refer to the
“Explanation”
Explanation  By default, this command sets the parameter of the channel currently selected.
If you want to set the parameter of other channel, please use
the
:INSTrument[:SELEct] command to select the desired channel.
 The current default values of each user-preset state are as shown in the table
below.
DP831A DP832A/DP832
CH1 CH2 CH3 CH1 CH2 CH3
USER1 0.5000A 1.0000A 1.0000A 1.0000A 1.0000A 1.0000A
USER2 1.0000A 1.0000A 1.0000A 1.0000A 1.0000A 1.0000A
USER3 1.0000A 1.5000A 1.5000A 2.0000A 2.0000A 1.0000A
USER4 1.0000A 2.0000A 2.0000A 3.0000A 3.0000A 2.0000A
Return Format The query returns the current, for example, 1.5000.
Example :PRES:USER1:SET:CURR 1.5
:PRES:USER1:SET:CURR?
:PRESet:USER[n]:SET:DEFault
Syntax :PRESet:USER[n]:SET:DEFault
Description Restore the parameters of the specified user-preset state to default values.
Parameter
Name Type Range Default
[n] Discrete 1|2|3|4 None
Explanation For the default values of the user-preset states, refer to the “Explanation” of
the
:PRESet:USER[n]:SET:CURRent and :PRESet:USER[n]:SET:VOLTage
commands.
Related
Commands
:PRESet:USER[n]:SET:CURRent
:PRESet:USER[n]:SET:VOLTage

Rigol DP832 Specifications

General

Number of Outputs	3
Output Voltage Range CH1/CH2	0-30V
Output Voltage Range CH3	0-5V
Output Current Range CH1/CH2	0-3A
Output Current Range CH3	0-3A
Total Power	195 W
Power per Channel CH1/CH2	90 W
Power per Channel CH3	15 W
Voltage Resolution	1 mV
Current Resolution	1 mA
Interfaces	USB, RS232
Display	3.5 inch TFT LCD