Rigol DP832 Programming Guide

RIGOL Chapter 2 Command System
2-24 DP800 Programming Guide
:MMEMory:STORe
Syntax :MMEMory:STORe <file_name>
Description Save the file with the specified filename under the current operation directory.
Parameter
Name Type Range Default
<file_name>
ASCII character
string
Filename of the file to be saved,
including Chinese characters, English
characters or numbers
None
Explanation  With this command, you can save the state file (RSF), timer file (RTF) and delay file
(RDF).
 If the current operation directory already contains a file with the same filename,
this command will overwrite the original file directly.
Example :MMEM:STORe STB.RSF /*Save the current instrument state under the current
operation directory with the name STB.RSF*/

Rigol DP832 Specifications

General

Number of Outputs	3
Output Voltage Range CH1/CH2	0-30V
Output Voltage Range CH3	0-5V
Output Current Range CH1/CH2	0-3A
Output Current Range CH3	0-3A
Total Power	195 W
Power per Channel CH1/CH2	90 W
Power per Channel CH3	15 W
Voltage Resolution	1 mV
Current Resolution	1 mA
Interfaces	USB, RS232
Display	3.5 inch TFT LCD