Rigol DP832 Programming Guide

RIGOL Chapter 2 Command System
2-28 DP800 Programming Guide
:MONItor:STOPway
Syntax :MONItor:STOPway {OUTOFF|WARN|BEEPER|NONE},{ON|OFF}
:MONItor:STOPway?
Description Set the stop mode of the monitor. Multiple stop modes can be enabled at the same
time.
Query the stop mode of the monitor.
Parameter
Name Type Range Default
{OUTOFF|WARN|BEEPER|
NONE}
Discrete OUTOFF|WARN|BEEPER None
{ON|OFF} Bool ON|OFF ON
Explanation When the channel output state meets the monitor condition set, the instrument will
turn off the output, display the corresponding prompt message or sound the beeper
according to the stop mode selected.
Return Format The query returns the on/off status of OUTOFF, WARN and BEEPER, for example,
OutputOff:ON,Warn:ON,Beep:ON.
Example :MONI:STOP BEEPER,OFF /*Disable the “Beeper” stop mode*/
:MONI:STOP? /*Query the current states of the stop modes of the monitor*/
/*The query returns OutputOff:ON,Warn:ON,Beep:OFF*/

Rigol DP832 Specifications

General

Number of Outputs	3
Output Voltage Range CH1/CH2	0-30V
Output Voltage Range CH3	0-5V
Output Current Range CH1/CH2	0-3A
Output Current Range CH3	0-3A
Total Power	195 W
Power per Channel CH1/CH2	90 W
Power per Channel CH3	15 W
Voltage Resolution	1 mV
Current Resolution	1 mA
Interfaces	USB, RS232
Display	3.5 inch TFT LCD