Rigol DP832 Programming Guide

Chapter 2 Command System RIGOL
DP800 Programming Guide 2-71
:TIMEr:TEMPlet:OBJect
Syntax :TIMEr:TEMPlet:OBJect {V|C}[,<value>|MINimum|MAXimum]
:TIMEr:TEMPlet:OBJect? [MINimum|MAXimum]
Description Select the editing object of the templet and set the current or voltage.
Query the editing object of the templet as well as the corresponding current or
voltage.
Parameter
Name Type Range Default
{V|C} Discrete V|C V
<value> Real
Voltage or current range of the
channel currently selected
0
Explanation When V is selected, the editing object is set to voltage and <val> sets the current
value; when C is selected, the editing object is set to current and <val> sets the
voltage value.
Return Format The query returns the editing object and the voltage or current value, for example,
V,2.0000.
Example :TIME:TEMP:OBJ V,2
:TIME:TEMP:OBJ?
Related
Command
:TIMEr:TEMPlet:SELect
:TIMEr:TEMPlet:PERIod
Syntax :TIMEr:TEMPlet:PERIod <value>
:TIMEr:TEMPlet:PERIod?
Description Set the period of Square.
Query the period of Square.
Parameter
Name Type Range Default
<value> Integer 2 to 99999 10
Return Format
The query returns an integer from 2 to 99999, for example, 15.
Example :TIME:TEMP:PERI 15
:TIME:TEMP:PERI?
Related
Commands
:TIMEr:TEMPlet:SELect
:TIMEr:TEMPlet:WIDTh

Rigol DP832 Specifications

General

Number of Outputs	3
Output Voltage Range CH1/CH2	0-30V
Output Voltage Range CH3	0-5V
Output Current Range CH1/CH2	0-3A
Output Current Range CH3	0-3A
Total Power	195 W
Power per Channel CH1/CH2	90 W
Power per Channel CH3	15 W
Voltage Resolution	1 mV
Current Resolution	1 mA
Interfaces	USB, RS232
Display	3.5 inch TFT LCD