RIGOL 2 Command System
2-60 MSO2000A/DS2000A Programming Guide
:CALCulate:LOGic:ATHReshold
:CALCulate:LOGic:BTHReshold
Syntax
:CALCulate:LOGic:ATHReshold <thre>
:CALCulate:LOGic:ATHReshold?
:CALCulate:LOGic:BTHReshold <thre>
:CALCulate:LOGic:BTHReshold?
Description
Set or query the threshold of signal source A or B of logic operation.
Parameter
Name Type Range Default
<thre> Real -4×VerticalScale-OFFSet to 4×VerticalScale-OFFSet 0
Note: For the VerticalScale, refer to the :CHANnel<n>:SCALe command. For the OFFSet, refer to
the
:CHANnel<n>:OFFSet command.
Explanation
This command is only available when signal source A or B is CH1 or CH2.
If the current logic operation type is NOT, you only need to set the threshold of signal source A.
Return Format
The query returns the threshold in scientific notation.
To Next Page
Loading...
