Chapter 13 Pass/Fail Test RIGOL
MSO7000/DS7000 User Guide 13-1
Chapter 13 Pass/Fail Test
During the product design and manufacturing process, you usually need to monitor
the variations of the signal or judge whether the product is up to standard. The
pass/fail test function of MSO7000/DS7000 series oscilloscope can accomplish this
task perfectly.
Contents in this chapter:
◼ To Enable or Disable the Pass/Fail Test
◼ To Start or Stop the Pass/Fail Test Operation
◼ To Select the Source
◼ To Create a Mask
◼ To Save the Mask
◼ To Load a Mask
◼ To Set the Output Form of the Test Results
◼ To Enable or Disable the Display of the Statistics of the Test Results
◼ Statistics Reset
To Next Page
Loading...
