RIGOL Chapter 18 Store and Load
18-10 MSO7000/DS7000 User Guide
⚫ To Delete a File or Folder
⚫ To Copy and Paste a File or Folder
⚫ To Rename a File or Folder
⚫ To Clear the Internal Memory Safely
To Select a File Type
Except the image storage, waveform storage, and setup storage, the oscilloscope
can also save the files of advanced applications.
Press Storage → Disk → File Type, rotate the multifunction knob to select the
desired file type. The default is "*.*". In the current path, only the file whose suffix of
its file name matches that of the file type selected will be displayed in the current
path.
To Create a Folder
Before using the external disk, make sure that a USB storage device (FAT32 format,
flash memory) is connected correctly.
In the disk management interface, rotate the multifunction knob to select the
storage location. By default, the internal memory "Local Disk(C)" is selected. Press
NewFolder to enter the interface, as shown in Figure 18-2.
Figure 18-2 To Create a Folder
This oscilloscope supports Chinese/English input method. The length of the folder
To Next Page
Loading...
