Rigol DS7024 - Factory Settings

RIGOL Chapter 18 Store and Load
18-16 MSO7000/DS7000 User Guide
is displayed.
3) Press OK to clear all the files stored in the internal memory.
Factory Settings
Press Default on the front panel, then a prompt message "Restore default?" is
displayed. Press OK or tap OK to restore the oscilloscope to the factory default
settings, as shown in the table below.
Table 18-1 Factory Settings
Parameter
Factory Settings
Horizontal
Vertical
Acquire
Trigger
Display
Dual-channel Function/AWG (GI or GII)
Cursor
Storage
Utility
Math
Logic Analyzer (LA)
Protocol Decoding (Decode)
Ref
Horizontal
Horizontal Time
Base
1 μs
Horizontal Position
0 s
Delayed Sweep
Off
Timebase Mode
YT
Fine
Off
Horizontal
Expansion
Center
Vertical
Vertical Scale
100 mV
Vertical Offset
0 V
CH1
On
CH2
Off
CH3
Off
CH4
Off
Channel Coupling
DC
BW Limit
Off