RIGOL  Chapter 1 Quick Start 
1-12  MSO7000/DS7000 User Guide 
Rear Panel Overview 
 
 
 
   
 
 
Figure 1-14 Rear Panel 
 
1.  Handle 
Rotate the handle upright to carry the instrument easily. Rotate it 
downward if you do not need to carry it. 
 
2.  LAN Interface 
Connect the instrument to network via this interface. The instrument is in 
compliance with the standards specified in LXI Device Specification 2011. It 
can be used to set up a test system. 
When you access to the Internet, you can use the Web Control or PC 
software Ultra Scope to send the SCPI commands or use the user-defined 
programming to control the instrument. When update is available, you can 
perform online upgrading for the system software of the instrument via the 
LAN interface. After it is connected to the network, you can print the 
waveform displayed on the screen when you use the network printer.