Rion VM-56 - Backlight (S;R); Backlight Auto off (S;R); Load Default Factory Settings Load Default Factory Settings (S)

109
Serial Interface
Backlight
Backlight
Setting ON/OFF of backlight
Setting command Backlight, p1
Parameter p1= “Off”
p1= “On”
Request command Backlight?
Response data d1
Returned value Same as for setting command
Backlight Auto Off
Backlight auto off
Setting time of backlight auto off
Setting command Backlight Auto Off, p1
Parameter p1= “Short” (30 seconds)
p1= “Long” (3 minutes)
p1= “Cont” (continue)
Request command Backlight
Auto Off?
Response data d1
Returned value Same as for setting command
Load Default Factory Settings
Load default factory settings
Setting On/OFF of Load default factory settings
Setting command Load default factory settings, p1
Parameter p1= “Off”
p1= “On”
Response data d1
Returned value Same as for setting command