Rion VM-56 - Determine for Dominant Frequency Line (S;R); Frequency Weighting of Human Vel Upper (S;R)

131
Serial Interface
Vel Human Upper
Frequency weighting of human Vel upper
Setting upper limit of frequency range for Human exposure Vel.
Setting command Vel
Human Upper, p1
Parameter p1= “80Hz”
p1= “100Hz”
p1= “250Hz”
p1=“Sensor Dependent”
Request command Vel
Human Upper?
Response data d1
Returned value Same as for setting command
Dominant Frequency Line
Determine for dominant frequency line
Setting of Dominant Frequency Line
Setting command Dominant Frequency Line, p1
Parameter p1= “No Line”
p1= “Line1”
p1= “Line2”
p1=“Line3”
Request command Dominant
Frequency Line?
Response data d1
Returned value Same as for setting command