Rion VM-56 - Manual Store Address (S;R); Measurement (S;R); Sleep Mode (S;R)

125
Serial Interface
Sleep Mode
Sleep mode
Setting ON/OFF of sleep mode
Setting command Sleep
Mode, p1
Parameter p1= “Off”
p1= “On”
Request command Sleep
Mode?
Response data d1
Returned value Same as for setting command
Manual Address
Manual store address
Setting manual store address
Setting command Manual Address, p1
Parameter p1= “1 to 1000”
Request command Manual
Address?
Response data d1
Returned value Same as for setting command
Measure
Measurement
Measurement start and stop
Setting command Measure, p1
Parameter p1= “Start”
p1= “Stop”
Request command Measure?
Response data d1
Returned value Same as for setting command
When executing the command on the address in which data exists already,
the data is overwritten.