Rion VM-56 - Frequency Weighting of Acc Lower (S;R); Frequency Weighting of Acc Upper (S;R); Frequency Weighting of Building Vel and Disp Lower (S;R)

129
Serial Interface
Acc Lower
Frequency weighting of Acc lower
Setting lower limit of frequency range for Acc.
Setting command Acc
Lower, p1
Parameter p1= “0.5Hz”
p1= “1Hz”
p1= “4Hz”
Request command Acc
Lower?
Response data d1
Returned value Same as for setting command
Acc Upper
Frequency weighting of Acc upper
Setting upper limit of frequency range for Acc.
Setting command Acc Upper, p1
Parameter p1= “80Hz”
p1= “100Hz”
p1= “250Hz”
p1= “Sensor Dependent”
Request command Acc
Upper?
Response data d1
Returned value Same as for setting command
Vel Disp Build Lower
Frequency weighting of building Vel and Disp lower
Setting lower limit of frequency range for Building damage Vel. and Disp.
Setting command Vel Disp Build Lower, p1
Parameter p1= “0.5Hz”
p1= “1Hz”
p1= “4Hz”
Request command Vel
Disp Build Lower?
Response data d1
Returned value Same as for setting command