Rion VM-56 - Total Measurement Time of Auto Store (S;R); Total Measurement Time of User Setting on Auto Store (Number) (S;R)

122
Serial Interface
Measurement Time Preset Auto
Total measurement time of auto store
Setting total measurement time of the auto store mode
Setting command Measurement
Time Preset Auto, p1
Parameter p1= “10s”
p1= “30s”
p1= “1m”
p1= “5m”
p1= “10m”
p1= “15m”
p1= “30m”
p1= “1h”
p1= “8h”
p1= “24h”
p1= “Manual” (User setting)”
Request command Measurement
Time Preset Auto?
Response data d1
Returned value Same as for setting command
Measurement Time Auto (Num)
Total measurement time of user setting on auto store (number)
Setting value when “Measurement Time Preset” command parameter is
“Manual” on auto store mode
Setting command Measurement
Time Auto (Num), p1
Parameter p1= 1 to 59 (Time unit is s [second] or m [minute])
p1= 1 to 23 (Time unit is h [hour])
p1= 1 to 200 (For Time Institution Day also up to
41 for Inst Store ON)
Request command Measurement
Time Auto (Num)?
Response data d1
Returned value Same as for setting command