Rion VM-56 - Timer Auto Measurement Interval (S;R); Timer Auto Stop Time (S;R)

124
Serial Interface
Timer Auto Stop Time
Timer auto stop time
Setting timer auto stop time
Setting command Timer
Auto Stop Time, p1/p2/p3 p4:p5:p6
Parameter p1= 2018 or after (year)
p2= 1 to 12 (month)
p3= 1 to 31 (date)
p4= 0 to 23 (hour)
p5= 0 to 59 (minute)
p6= 0 (second: only 0)
Request command Timer
Auto Stop Time?
Response data d1/d2/d3
d4:d5:d6
Returned value Same as for setting command
Returned value Same as for setting command
Timer Auto Interval
Timer auto measurement interval
Setting timer auto measurement interval
Setting command Timer Auto Interval, p1
Parameter p1= “Off”
p1= “5m”
p1= “10m”
p1= “15m”
p1= “30m”
p1= “1h”
p1= “8h”
p1= “24h”
Request command Timer
Auto Interval?
Response data d1
Returned value Same as for setting command