Rion VM-56 - Delay Time (S;R); Line (SBR Mode) (S;R)

133
Serial Interface
SBR Dominant Frequency Line
Determine for dominant frequency line (SBR Mode)
Setting of Dominant Frequency Line (SBR Mode)
Setting command SBR
Dominant Frequency Line, p1
Parameter p1= “No Line”
p1= “Line1”
p1= “Line2”
p1=“Line3”
Request command SBR
Dominant Frequency Line?
Response data d1
Returned value Same as for setting command
Delay Time
Delay time
Setting delayed measurement time
Setting command Delay Time, p1
Parameter p1= “Off”
p1= “10s”
Request command Delay
Time?
Response data d1
Returned value Same as for setting command