Rion VM-56 - Communication Interface (S;R); Comparator Node Frequency (S;R); Comparator Node PPV (S;R)

116
Serial Interface
Comparator Node”x” Frequency
Comparator node frequency
Setting node”x” frequency setting
Set frequency of xth node
The value multiplied by 0.1 is set as the parameter
Setting command Comparator Node ”x” Frequency, p1
Parameter p1= 5 to 3150
Request command Comparator Node ”x” Frequency?
Response data d1
Returned value Same as for setting command
Comparator Node”x” PPV
Comparator node PPV
Comparator node”x” PPV setting
Set PPV threshold of xth node
The value multiplied by 0.01 is set as the parameter
Setting command Comparator Node ”x” PPV, p1
Parameter p1= 5 to 10000
Request command Comparator Node ”x” PPV?
Response data d1
Returned value Same as for setting command
Communication Interface
Communication interface
Setting communication interface
Setting command Communication Interface, p1
Parameter p1=“Off”
p1= “USB”
p1= “RS232C”
Request command Communication
Interface?
Response data d1
Returned value Same as for setting command