Rion VM-56 - (Number) (S;R); Calculation Interval (S;R); Calculation Interval of User Setting

119
Serial Interface
Calculation Interval Preset
Calculation interval
Setting calculation interval
Setting command Calculation
Interval Preset, p1
Parameter p1= “Off”
p1= “10s”
p1= “30s”
p1= “1m”
p1= “5m”
p1= “10m”
p1= “15m”
p1= “30m”
p1= “1h”
p1= “8h”
p1= “24h”
p1= “Manual” (User setting)
Request command Calculation
Interval Preset?
Response data d1
Returned value Same as for setting command
Calculation Interval (Num)
Calculation interval of user setting (number)
Setting value when “Calculation Interval Preset” command parameter
is “Manual”
Setting command Calculation Interval (Num), p1
Parameter p1= 1 to 59 (Time unit is s [second] or m [minute])
p1= 1 to 24 (Time unit is h [hour])
Request command Calculation
Interval (Num)?
Response data d1
Returned value Same as for setting command