67
Store operation
About SD memory cards
The memory cards that can be used in this unit are SD memory cards. Be sure
to use optional SD memory cards for VM-56 provided by Rion. SD memory
cards even from the same manufacturer and of the same type exhibit certain
variations in speci cations which may cause problems. For this reason, be
sure to use only the SD memory cards for VM-56 provided by Rion. The
performance of other cards is not guaranteed.
An SD memory card inserted in the unit will be recognized as a removable
disk by the computer when connected via USB, without having to install a
USB driver.
To make the connection, use a generic USB cable (standard A male to mini
B male connector). When not using the communication function, set the
Communication Interface to OFF from the [Display / I/O] screen. When USB
communication is enabled, a message requesting installation of a USB driver
for USB communication will appear when the unit is connected to a computer.
Note
When using spreadsheet software or other programs
on a computer to retrieve data from SD memory
cards, some programs may not be able to read the
original le names from the card. In such a case,
rename the le using the extension “txt” (for example
“VM_001_VM_MANU_0123_0000.txt”). For soft-
ware that identi es les by the le name extension,
set the software up for reading text les.
If measurement data in the SD memory card is moved
to a computer and then moved back to VM-56, the
measurement date (time stamp) may be different
from the actual date.
To Next Page
Loading...
