Rion VM-56 - Output Displayed Value (R)

138
Serial Interface
Data output
DOD
Output displayed value
Send the request command at one second interval or longer.
Request command DOD?
Response data d1,d2,...,d67
Returned value d1 = “xxx.x” Acc. of X channel (Inst value)
d2 = “xxx.x” PPV of X channel (Inst value)
d3 = “xxx.x” D.F. of X channel (Inst value)
d4 = “xx.xx” Disp. of X channel (Inst value)
d5= 0 or 1 Inst Overload information
(1: Yes, 0: No)
d6= 0 or 1 Inst Under-range information
(1: Yes, 0: No)
d7 = “xxx.x” Acc. of X channel (Max hold
value)
d8 = “xxx.x” PPV of X channel (Max hold
value)
d9 = “xxx.x” D.F. of X channel (Max hold
value)
d10 = “xxx.x” Disp. of X channel (Max hold
value)
d11 = 0 or 1 Max hold Overload information
(1: Yes, 0: No)
d12 = 0 or 1 Max hold Under-range information
(1: Yes, 0: No)
d13 = “xxx.x” PPV of X channel (Calc value)
d14 = “xxx.x” D.F. of X channel (Calc value)
d15 = “xxx.x” Disp. of X channel (Calc value)
d16 = “xxx.x” Acc. of X channel (Calc value)
d17 = “xxx.x” C.F. of X channel (Calc value)
d18 = “xxx.x” MTVVof X channel (Calc value)
d19 = “xxx.x” VDV of X channel (Calc value)