Rion VM-56 - Data Recovery; Formatting an SD Memory Card

68
Store operation
Data recovery
If an unexpected power failure occurs, the data may be damaged. In such a
case, turn the unit on without removing the SD memory card since the unit is
equipped with a data recovery function. Formatting on a computer cannot recover
the data. However, please note that the recovery of all data is not guaranteed.
Modi ed data cannot be displayed with the recall function of the VM-56. Such
data must be checked on a computer.
Formatting an SD memory card
Note
When an SD memory card is formatted (initialized),
all data present on the card will be lost.
In the following cases, you should format the SD memory card:
• When using the SD memory card in the VM-56 for the  rst time
• When wishing to delete all data from the SD memory card
Note
Before using an SD memory card in this unit, for-
matting it in a computer is recommended.
Formatting here refers to formatting the card while
it is actually inserted in the computer. It does not
refer to formatting the card from the computer while
it is inserted in the VM-56 and recognized as a re-
movable disk.
To format an SD memory card, proceed as follows.
1. Select [Card Format] on the [SYSTEM] screen and press the MENU/
ENTER key.
2. The con rmation screen appears. Press the MENU/ENTER key.
Note
When formatting the SD memory card in a computer,
select FAT or FAT32 as  le system.